Klarfit Barracuda Mode D'emploi page 24

EN
24
Rear mounted
Caution
Before installing, make sure that there are no objects between the handrail
and the bracket.
1. Rocker arm - use the rocker arm to adjust the tilt angle of the engine. Press
the rocker arm, adjust the tilt angle with the handle and release the rocker
arm.
2. Adjusting the steering sensitivity - tighten or loosen the knob on the front
of the bracket to adjust the steering sensitivity.
3. Adjusting the depth adjustment ring - the depth of the engine can be
adjusted by loosening the depth adjustment ring on the support bar above
the mount. The handrail can be moved this way. When the engine is at
the desired depth, the depth adjustment ring can be tightened again for
fixation.
4. Rear propellers - the rear propellers allow easy installation and removal
of the engine. Attach the engine to the stern of the boat and fix it by
tightening the stern bolts.