Amazonas KOALA Notice De Montage page 7

Important –
keep for future reference!
Assembly instruc� ons:
i
A) Fold out the side parts of the stand (with the rubber feet facing downward!)
and set up in accordance with the illustra� ons.
B) Hang the baby hammock (with wooden expansion struts) into the hook in the eye bolt.
C) If you want to make absolutely sure that the hammock cannot overturn, you can
install the safety belt under the hammock. This is par� cularly important if there are
other children or a dog in your home, which might to rock the baby.
D) Install the safety harness system under the hammock in accordance with the
illustra� ons. Make sure that the two horizontal belts which grab around the ground
struts are fi rmly � ghtened. The belt directly under the hammock can be adapted to the
height of the hammock and should be slightly taut in order to limit the rocking mo� on.
E) Adjus� ng the Depth of the Hammock
• Open press-stud on the corner of the baby hammock and uncover the wooden rod.
• Push back the hammock material, so that the knot becomes visible. Loosen
knot and pull the cord outwards through the slit in the wooden rod, un� l the
desired gathering is achieved.
• Tighten the knot again and close press-stud.
• Repeat process on all four corners.
• Result: hammock hangs lower.
-> If a fl a� er surface for lying down is desired on the hammock, the cord must be
shi� ed inwards a� er loosening of the knot.
F) Adjustability of the suspension height of the hammock
• There is a metal triangle to adjust the suspension height of the Koala on each of
the four long suspension ropes.
• Arrange the metal triangles so that the long suspension ropes run in a straight line
through the triangles. Now push all four metal triangles up at the same � me to
move the hammock lower, or move them down to increase the hammock's height
from the ground.
6
EN
AMAZONAS ® KOALA
www.amazonas-baby-world.com