Maintenance - Klarstein SKYSCRAPER HEAT Mode D'emploi

EN
24

MAINTENANCE

Changing the battery
• Pull out the battery door at the back side of remote control.
• Pay attention to the battery polarity, and insert the battery (CR2032) to the
tray of the door .
• Push the battery door into the remote control.
Cleaning
• Make sure that the device is switched off before cleaning or maintenance.
• Wipe the surface of the device by using a clean wet cloth or punctuate
washing-up liquid.
• Do not use the washing-up liquid which is mordant, like petrol, Do not
submerge in water. Do not use chemical liquids.