Axis T93G Serie Guide D'installation page 15

1
Bottom cover
2
Screw T20 (4x)
3
Wall mount
4
Bracket adjustment screw T30
11. For information about how to view the video stream, see the camera's Installation Guide
or www.axis.com/techsup
NO NO TICE NO TICE TICE
Make sure not to pinch any cables when closing the housing.
12. Close the housing. Make sure to alternately tighten the bottom cover screws a few turns
at a time until they are tight (torque 1.5 Nm). This will help ensure that the bottom
cover gasket is compressed evenly.
Further Information
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and
guides.
1
2
3
4
15
AXIS T93G Series