Maxx-world 00343 Mode D'emploi page 4

EN
4. When the fragrance block is used up, replace it.
You can buy additional spare fragrance blocks at:
www.maxxworld.de
Replacing the Cap
The chrome-plated cap is fi tted on the drain plug when it is
supplied.
1. Press the cap upwards on one side using
both thumbs until the cap is detached from
the drain plug (see picture). Take off the
cap.
2. Place the cap you want centrally on the
drain plug and press it down. Press it again
at the edges if necessary. You must hear
and feel the cap engage.
Replacing Fragrance Block
1. Remove the article from the drain.
2. Pull the fragrance block holder out of the upper part of the
drain plug.
3. Place the fragrance block with the fi lm into the fragrance block
holder. We recommend that you use protective gloves when
handling the fragrance block.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
4. Slide the fragrance block holder into the upper part of the drain
plug. Adjust the height to your drain.
5. Place the article into the drain.
Disposal
The packaging material is recyclable. Please dispose of
the packaging material and the set in an environmentally
friendly manner and take it to a recycling centre.
Customer Service / Importer:
All rights reserved.
✆
+49 38851 314650 *)
Z 00343 M DS V1 1116
Instructions