Télécharger Imprimer la page

Maxx-world 00343 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

EN
Dear Customer,
We are delighted that you have chosen the "Abfl uss-Fee" drain
plug. If you have any questions, contact the customer service
department via our website:
www.service-shopping.de
Please Note
The article is suitable for drains of washbasins and sinks,
shower trays and bath tubs with eccentric rods.
Keep the article and packaging material out of the reach of
children and animals. There is a risk of injury and suffocation!
The article is not a toy!
The fi lm around the fragrance block is water-soluble and does
not need to be removed.
In spite of correct adjustment of the height, it may be the case
that the article protrudes further out of the drain in comparison
to conventional drain plugs.
It is possible that the water will drain away more slowly than
with conventional drain plugs.
Do not use corrosive or abrasive cleaning agents or cleaning
pads for cleaning.
The article is designed for personal use only and is not intended
for commercial applications. Use the article only as described
in the instructions. Any other use is deemed to be improper.
The following are excluded from the warranty: all defects
caused by improper handling, damage or unauthorised
attempts at repair. This also applies to normal wear and tear.
Article number: 00343
Items Supplied
1 x drain plug
1 x fragrance block holder
1 x fragrance block
1 x cap, chrome-plated
2 x cap, patterned
Use
1. Remove the conventional drain plug.
3. Place the article into the drain.
Please note:
– If you want to seal the drain shut, do not press on the article!
You could adjust the height of the article. Only ever open and
close the drain using the eccentric mechanism.
– During cleaning the fragrance block holder may retract and
lose contact with the eccentric rod. Remove the article and
readjust the height.
2. The height of the article needs to be
adapted to the drain. To do this, pull the
fragrance block holder out of the upper
part of the drain plug until the height you
want is achieved.
Please note: The article must be adjusted
so that the fragrance block holder forms
a fl ush connection with the eccentric rod
in the drain. You will then ensure that the
drain can be opened and closed.
Instructions

Publicité

loading