Operation And Application - Rex-Kara Premium SPI Manuel

THE SPI TREATMENT DEVICE HAS 5
PRESET SPI PROGRAMS
PROGRAM 1
DEEP CLEANSING – DETOX FOR THE SKIN
Highly-effective intensive cleansing.
The first step towards healthy skin. Removes pollutants
and moisturizes the skin. Leaves a long- lasting clear, deep
pore- clean skin that shines in a new freshness.
SPI technology: Ultrasound, Galvanic (+) & Photons (blue)
The program automatically shuts off after 5 minutes.
To achieve a more efficient effect, the treatment can be
prolonged.
PROGRAM 2
DEEP THERAPY – ACTIVE INGREDIENT POWER
Advanced intensive care to prevent premature skin aging.
The skin is supplied with moisture and nutrients and rege-
nerated. The result: a radiantly fresh, firm and
healthy-looking skin.
Technology: Ultrasound, Galvanic (-) & Photons (red)
The program automatically shuts off after 5 minutes.
To achieve a more efficient effect, the treatment can be
prolonged.
PROGRAM 3
CLASSIC THERAPY - ACTIVATION OF THE SKIN
Effective type of wrinkle reduction for smoother skin.
Actively activates the body's natural production of
collagen, elastin and laminin, giving the skin a fresh and
smooth appearance. Also suitable for use with non-ionised
(conventional) cosmetics
Technology: Ultrasound & Photons (red)
The program automatically shuts off after 5 minutes.
To achieve a more efficient effect, the treatment can be
prolonged.
28
PROGRAM 4
BODY THERAPY - BODY CARE INTENSIVE
Intense care for a charmingsilhouette
Activates the body's natural production of collagen, elastin
and laminin. The treatment has a positive effect on fat cell
volume and connective tissues.
Technology: Ultrasound, Galvanic (+/-) & Photons (red)
The program automatically shuts off after 10 minutes.
To achieve a more efficient effect, the treatment can be
prolonged.
PROGRAM 5
PHOTON FACE THERAPY – LIGHT ENERGY FOR THE SKIN
Color light therapy with the energy of blue and red
photons.
The energy of blue photons has a calming effect on the
skin and relieves skin irritation. Red photons stimulate
blood circulation and metabolism and give the skin new
energy and vitality.
Technology: Photons (blue or red)
The program automatically shuts off after 10 minutes.
To achieve a more efficient effect, the treatment can be
prolonged.

7. OPERATION AND APPLICATION

SWITCHING ON AND OFF
To turn on the SPI device, press the on/off button. After
expiration of preset program duration of 5 or 10 minutes,
the device switches itself off automatically.
You can also switch off the device manually by pressing the
on/off button again; A long beep will sound and the unit will
switch off.
SPI PROGRAM SELECTION
To select the desired program, press the program button
repeatedly until the indicator ight for the corresponding
program numbers lights up red. As a check, an acoustic
signal sounds every time the button is pressed. When the
device is switched on, program 1 (Cleansing) starts
automatically.
ADJUSTING THE INTENSITY
Your SPI device has three intensity levels, which can be
individually set, independently of the selected programand
can be changed as required during the program cycle.
Intensity refers to the strength of galvanic ionization in
programs 1 (Cleansing), 2 (Deep Therapy) and 4
(Body Therapy).
For Programs 1 (Cleansing), 2 (Deep Therapy), 3 (Classic
Therapy) and 4 (Body Therapy), the intensity refers to the
ultrasound density, while the ultrasound frequency of 2 MHz
remains constant.
For Programms 1 (Cleansing), 2 (Deep Therapy), 3 (Classic
Therapy) and 4 (Body Therapy), you can select the
following intensity levels:
1. Low
2. Medium
3. High
Program 5 (Photon Face Therapy), uses the intensity
button to adjust the color of the light and its appearance.
You can choose from the following options:
1. Blue light permanent
2. Red light pulsing
3. Red light permanent
To adjust the intensity or type of color light therapy, press
the intensity button repeatedly until the indicator lights up
in the corresponding color.
When the SPI unit is switched on, it is automatically set to
the lowest intensity level (green).
ATTENTION: The treatment of particularly sensitive or
irritated skin is recommended with low (green) or medium
(orange) intensity.
For normal skin and for maximum effect, please use the
highest intensity (red), please use the highest intensity
setting (red).
It is advised to start the treatment with the lowest
intensity level and then gradually increase it, if necessary,
according to the sensitivity of the skin.
APPLICATION
1. Choose one of the 18 SPI treatments (see Section 9).
2. Turn on the SPI device (see Section 7).
3. Select the appropriate program.
4. Select the desired intensity level (see Section 7).
5. Apply sufficient (pea-sized drop) cosmetic substance to
the treatment head.
6. Slowly move the treatment head over the skin.
7. Stay for about 5 to 10 seconds on each skin area and 10
to 20 seconds for areas you would like to treat more
intensively (e.g. mimic wrinkles or fatty deposits).
• Make sure that there is always enough of the cosmetics
substance (approximately pea-sized) between the
treatment head and the skin. Apply more if needed.
• If you are treating another person, please make direct
skin contact with this person (e.g. touching them with
your hand). This closes the fine flow circuit and activates
the galvanic ionization. You can perform individual or
different treatments several times or after each other.
• To control the duration of treatment, the SPI device will
switch off automatically after a preset program has been
completed.
• Programs 1 (Cleansing), 2 (Deep Therapy) and
3 (Classic Therapy) switch off after 5 minutes.
Programs 4 (Body Therapy) and 5 (Photon Face Therapy)
switch off after 10 minutes. To perform the SPI treatment
for the recommended duration, repeat the appropriate
steps if necessary.
• You can stopthe programs manually at any time by
pressing the on/off button.
• After treatment with the SPI system, take 2-3 drops of
the serum and distribute them on the skin to dissolve
any product residue from the ultrasonic waves. If the
skin is temporarily saturated after an intensive
treatment, product residues on the skin may arise.
Remove with a damp cloth. Touch the contact strips on
the side of the handle.
DE
EN
FR
IT
NL
29