Ignition Switch/Steering Lock; Helmet Lock - Beta URBAN 125cc Mode D'emploi

1
KEYS AND LOCKS
The vehicle is supplied with two keys for
the ignition switch/steering lock and the

helmet lock.

WARNING
Do not keep the spare keys in the vehi-
cle. Keep the keys in a safe and easy-to-
reach place. The code number stamped
on the keys should be copied on this
manual (or elsewhere) so it can be used
to ask for duplicates should both keys be
lost.

IGNITION SWITCH/STEERING LOCK

It controls the ignition circuit and the
steering lock, and the opens the sad-
dle.
OFF: Electrical equipment disabled.
ON: The vehicle can be started.
LOCK: Steering lock on.
To lock the handlebar, turn it to
the left, press the key, rotate it
anticlockwise all the way and
then release it.
HELMET LOCK
Insert the key in to the lock located on
the left side under the saddle, and then
rotate it anticlockwise to open the helmet
hook.
GB
LOCK
12
OFF
ON