Nupower Evolution NPE136 Manuel page 17

GB
Always wear safety goggles and a dust mask. Always keep the
dust extraction holes in the vibrating plate free of dirt or other
obstructions.
MAINTENANCE
Always keep your Sander clean, regularly clean out the
ventilation slots.
Do not use caustic cleaning agents to clean the plastic
housing.
Always keep the dust extraction holes in the vibrating plate free
of dirt or other obstructions.
Water must never come into contact with the machine.
WARNING!
The Pad Sander is designed for dry sanding only and under no
circumstances should it be used for wet sanding.
NOTE
The Sander is not to be used for sanding Gypsum.
TECHNICAL SPECIFICATION
Voltage
Motor
No load speed
Pad dimensions
Sandpaper size
Sound Pressure Level
Sound Power Leve
Vibration Level
Weight
16
230~50 Hz
135W
10000 min-1
90 x 187 mm
90 x 240 mm
LPA 72,9 dB(A)
LWA 85,9 dB(A)
4 m/s2
1.6 kg