Technical Data; Important - KREA Swiss sprayBOX Mode D'emploi

DESCRIPTION
sprayBOX: reduces cleaning after spraying oil, glaze or chocolate etc.
Using a spray gun is much faster than a pastry brush, but sprayed materials such as
oil, glaze or chocolate get all over the place including the ventilation system, ceiling
and walls.
The collapsible sprayBOX limits the spread of such sprayed materials thereby
reducing cleaning requirements in the wider production area. Apart from the space
saving design, it is only a fraction of the costs of an industrial built-in spraying cabinet.
At almost 90 cm it is tall enough to allow spraying from above sufficiently wide to
rotate a standard baking tray. The simple design can be assembled and disassembled
very quickly for easy storage. All materials are of food grade and the high quality
stainless steel base tray and aluminium frame can be easily wiped down after usage.
The walls and roof material has been chosen for its light reflecting and easy to clean
properties - simply wipe down or machine wash. The sprayBOX saves hours of
cleaning and painting.

Technical Data

Weight:
Dimensions:
Tray:
Frame:
Cloth material:

IMPORTANT

The sprayBOX should only be assembled after the below instructions have
been read and are strictly adhered to.
• Follow the recommended guidelines for assembling and disassembling (Page 3).
• Please take care when lifting the sprayBOX. The high quality tray is made of
stainless steel, is of a large size and weighs approximately 6 kg. Due to its size
and weight it is not recommended to lift the sprayBOX if experiencing any type of
back issue.
• Do not place naked flames or chemicals close to the cloth material.
• Always clean immediately after use and store in a dry location.
2
All components coming into contact with sprayed materials consist of
food grade materials. Certificates of conformity are supplied on request.
7.5 kg *
90 x 90 x 90 cm
Stainless steel
Aluminum
Polyester FR
* approximate measure