LG PRADA 3.0 Mode D'emploi page 297

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

note: an active wlan running
in the background will consume
battery power. to preserve
battery power, activate the
wlan only when needed.
find and connect to a wlan
1.
Touch
> apps tab > settings
> Set wi-fi to On
device will automatically search
for available WLANs.
2.
Select a network.
3.
Enter a password for the network
(if necessary).
Select Connect.
4.
add a wlan manually
1.
Touch
> apps tab > settings
> Set wi-fi to On
network.
2.
Enter the SSID for the network
and select the security type.
3.
Set the security settings
depending on the selected
security type.
4.
Select save.
Connect to a wlan using a wi-fi
protected setup (wps)
to connect to a wlan with a wps
button
1.
Touch
Set wi-fi.
2.
Select a network indicated as
protected network available,
. The
and select the check box next to
show advanced options.
3.
Select the wps drop-down
menu.
Select push button > Connect.
4.
5.
Press a WPS button on the
access point within 2 minutes.
to connect to a wi-fi ap with a wps
pin,
> add
1.
Touch
Set wi-fi.
2.
Select a network indicated as
protected network available,
and select the check box next to
show advanced options.
3.
Select the wps drop-down
menu.
4.
Select PIN from access point or
pin from this device > Connect.
5.
On the access point, enter the
PIN and press the start button.
> apps tab > settings >
> apps tab > settings >
7

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

P940

Table des Matières