happybrush HS03 Mode D'emploi page 9

CLEANING
HANDLE
1. Take the brush head off and rinse the metal tip with
warm water. Please do not try to clean around the
seal of the metal tip with a sharp object because it
could damage the seal.
2. Now, simply wipe the handle with a dry cloth.
BRUSH HEAD
1. Rinse the brush head and bristles under running
water after every use. Then just shake excess water
off the brush head.
2. Remove the brush head from the toothbrush
at least once a week and clean the connection
between the handle and the brush head with warm
water.
3. Use a new brush head every 2-3 months for best
results. The indicator will tell you when: Simply
change it when the smile fades.
CHARGING STATION
1. Remove the plug from the mains socket before
cleaning the charging station.
2. Then wipe the charging station with a slightly damp
cloth.
Important: The handle, the brush heads, and the charging
station are not to be cleaned in the dishwasher. Do not
submerse the charging station in water. Do not use abrasive
cleaning agents. Also do not try to clean the charging
station with any kind of sharp metallic object or nylon
bristles.
DISPOSAL
RECYCLING
The environment is very important to us. When you
no longer use your happybrush, do not throw it in
with your normal household waste.
Dispose of your happybrush at a recycling centre for used
electrical and electronic devices. More information is
available from your local authorities.
To protect the environment, non-rechargeable
and rechargeable batteries must not be disposed
of with normal household waste, but must be
taken to suitable collection points. Also note the
relevant statutory regulations governing the
disposal of batteries.
The CE label on this product is our way of
confirming that it complies with the valid, product-
specific European guidelines.
The voluntary certification "GS" stands for
"Geprüfte Sicherheit" (certified safety)
following the requirements of the product
safety law. It certifies products that pose
no risk to the user when used in compliance
with operating instructions. Compliance is
reviewed by independent testing companies
such as TÜV SÜD.
WARRANTY
Your happybrush comes with a 1 year warranty as of the date of
purchase. If defects of material or function should occur during the 1
year warranty period, we will repair or replace your happybrush.
The original proof of purchase (original receipt or payment
confirmation) is to be sent to us as the warranty and proof of
ownership. The receipt must show the date of purchase, your name and
the full product type description of the device. The warranty applies
only to the original purchaser. Should the device be sold to a second
buyer, the warranty is no longer valid.
All claims from this warranty (which includes both the primary claim
as well as any secondary claims after a repair or a replacement) are
subject to a 12 month limitation period. The limitation period for the
primary warranty starts from the moment the defect is known or gross
negligent ignorance of the defect. The limitation period for secondary
claims begins with the delivery of the repaired or replaced product.
The product may be replaced with the same model or a comparably
equipped model. The replacement or repair of the product does not
justify a new warranty. The warranty does not apply to devices or
device parts subject to normal wear and tear and thus viewed as wear
parts. The warranty is void if the device has been damaged, not used
properly or not maintained properly. Repairs may only be done by
happybrush GmbH. To ensure proper utilization of the device, all of
the instructions which are listed in the operating instructions must be
complied with precisely. Using it and handling it in ways that are not
recommended in the instructions or
for which warnings exist are to be absolutely avoided.
Important: The warranty and warranty period for specific devices and
materials can differ from those shown here. These warranty restrictions
have no impact on the statutory claim to warranty. The following device
parts do not fall under the guarantee: Brush heads; damage due to
misuse, wrong use, negligence or changing the product; normal wear
and tear such as chipped spots, scratches, abrasions, discolourations
or fading.
SUPPORT
happybrush GmbH Hotline:
Amalienstr. 71 Email:
80799 Munich Web:
Importer: DS Direct GmbH | Am Heisterbusch 1, 19258 Gallin
TECHNICAL SPECIFICATIONS
Power 3.0 W
Voltage 100-240 V~ 50/60 Hz
Battery 3.7 V 800 mAh Li-Ion
Protection class Class III
Class II
Protection level
IPX5 (Handle)
IPX7 (Charging station)
Vibration
Normal: 30.000 per minute
Sensitive: 26.000 per minute
Polishing: 30.000 per minute
Massage: 26.000-37.500 per minute
Type HS03
Timer 4-quadrants timer (every 30 seconds)
Operation time approx. 84 minutes
Charging time Charge for 24 hours the first time,
thereafter 16 hours
+49 (0)89 24412635
support@happybrush.de
www.happybrush.de
(Handle)
(Charging station)
15