Getting Started; Powering Your System - Samsung WISENET SEW-3053W Manuel De L'utilisateur

g s
ettIng tarted

Powering Your system

Monitor
1.Fully charge the system before use.Camera must be plugged in at all times.
2.Push the power button for about 4-5 second to turn on the monitor.
3.To turn the camera "On", press the power switch located on the bottom of the camera.
A light will illuminate if it is turned on.
n
` Only use the enclosed Camera Power adapter.
SEW-3053W-170117.indd 9
Pairing Camera and Monitor
The units already come paired for your convenience.
If you have additional camera, pair your camera as follow:
1. The pair button is used to pair additional cameras. You can assign numbers to the
cameras.
2. To pair additional cameras: Quickly press the button. Do not hold down on the
button.
Up to 4 Cameras may be paired.
Power on wireless monitor and wireless camera.
1.
Touch the live view screen on the monitor to make the settings icon appear.
2.
Press the [
3.
Camera
Select [
4.
Select camera number.
5.
The monitor will search for the camera when set to pairing mode.
A countdown clock will appear at the middle of the screen and will start counting
from 30 to 0.
Press the [PAIR] button found on the bottom of the camera.
6.
If the monitor successfully pairs with the camera within the 30 seconds, the
7.
monitor will automatically switch to the camera's current view.
] button on the monitor.
] icon.
PAIR
English · 9
2017/1/17 14:41:09