Answering Calls; Using Siri - FRIEQ BTS-12 Manuel D'instructions

△
Note The Previous button has another function—to lock and unlock the touch
!
buttons. In case of touching any buttons to switch songs, adjust voice, or even
dial out a phone call, you can press the Previous button for 2 seconds, then all
the buttons will be locked. When you need to use the buttons, just double press
the Previous button, then all the buttons will be unlocked and you can control
your music again.

ANSWERING CALLS

You can use the BTS12 as a portable speakerphone for incoming calls when
connected wirelessly via Bluetooth. When there is an incoming call, the speaker
will play the ringtone of your phone itself. To answer a call, press the TALK
button and talk as you would with your device if it was on speakerphone. The
built-in microphone will pick up your voice just like a phone.
To end a call, press the TALK button again. To refuse a call, double click the
TALK button. You can re-dial the latest number called by double pressing the
TALK button.
Note If there is an incoming call while the buttons are locked, you don't need
△
!
to unlock them first, just pick up, end, or refuse the call as mentioned above.

USING SIRI

When the speaker is connected to an iPhone/iPad via Bluetooth, press and hold
the TALK button for 3 seconds to activate the SIRI function on iPhone/iPad. Then
talk to the speaker after hearing the "SIRI " sound.
Please note that the iPhone/iPad may not be able to recognize human speech
when the speaker is being used in a noisy environment. SIRI may not work if the
iPhone/iPad is not connected to the internet.
When the SIRI conversation is finished, the speaker will continue playing audio.
5