AIR CONDITIONING FOR PORTHOLE
Fix the internal plastic closure with the four M5 screws provided using an electric or manual screwdriver with a PH2 bit (Figure 12).
COMPLETION OF THE VEHICLE
•
Refit all the sections previously removed, following the reverse procedure.
•
Reconnect the battery.
•
Secure all loose wires with cable ties.
•
Adjust the time.
•
Enter the Radio Code if necessary.
•
Comply with administrative rules and safety warnings given in the technical notes.
Putting the Porthole Air Conditioner into service
•
Switch the Porthole Air Conditioner on from the on/off device. See the instructions for use.
Porthole Air Conditioner Scania My 2016 R&S 04/05/2018
3 - AFTER INSTALLATION
ENGLISH
Figure 12
17