Di4 Aspirovac Ultraforze 600 Mode D'emploi page 17

3-Adjust the angle between the brush and the body by rotating the handle.
4-Stop the unit working by pressing the On / Off button.
5-Unplug is and rotate the cable on winding holder.
DUAL FLOOR BRUSH
This unit is provided with 2 position brush.
Position 1 : for hard floors Position2 : for carpets
TO EMPTY & CLEAN THE DUST TANK
1. Disconnect the appliance from the main POWER
2. Open the hatch (under the appliance)Fig 1.
3. Remove the dust filter and clean it (see next paragraph) Fig 2.
4. Empty and clean the dust container.
5. After drying, replace the filter and close the hatch.
Fig. 1. Fig. 2.
TO CLEAN THE FILTER
1. After removing the filter from the vacuum cleaner, remove the foam filter (when it is dirty).
2. Clean it with water (possibly with a little detergent)
3. Rinse gently thoroughly!
17