Activation Of The Oscillator; Changing The Battery Of The Remote Control - Oceanic OCEASFBS2000W Guide D'utilisation

5. Activation of the oscillator

Press
Note: Oscillator will be back to home position automatically after turn off
Oscillator function or turn off the product.
Note: When not using the heater, turn off the appliance and unplug it from the
wall outlet.
Warning:
− This product can only be used in well isolated premises or occasionally.

6. Changing the battery of the remote control:

1. Remove the battery holder by pressing the locking tab A by pulling it in the
direction of the arrow B.
2. Replace the battery with the same type (CR2025) and the (+) side facing up.
3. Gently push in the holder until securely locked into place.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
to select the oscillation function.
35