GYS NOMAD POWER 500 Manuel D'utilisation page 10

Translation of the original instructions
PRODUCT DESCRIPTION
Thanks to its high-performance lithium-ion battery (77,7 Wh), the NOMAD POWER 500 performs 3 functions:
• Instant start of vehicles equipped with a 12V battery (6 cells of 2V), such as kartings, motorcycles, cars, vans, etc.
• 12 V power supply for small electronic devices via their USB ports. Most of mobile phones, smartphones, portable
gaming devices, MP3/MP4 players can be charged with the included accessories.
• Service lighting
       
NOMAD POWER 500
Extreme outside temperatures or mechanical problems on the vehicle (poor starter, no fuel or engine pro-
blems) can limit the booster's capacity.
OPERATION
Indicators
Lights
Internal battery
capacity for the
device
Indicators flash, one by one, whilst charging the device. Number of indicators ON indicates the capacity of the NO-
MAD POWER internal battery. All lights are steady if the battery is on hold or finished.
RECHARGE THE NOMAD POWER BATTERY before first use and after each use.
!
INTERNAL BATTERY CHARGING
IN 5V/9V 5V 1A 5V 2.1A
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles equipped with a 12V battery.
To start a vehicle, please process as follows:
The NOMAD POWER must be at least 80% charged to make a start attempt. A full charge of the booster is
!
recommended.
1
2
10
NOMAD POWER 500
Start function
Press the ON/OFF button (9) to check internal battery level of the NOMAD POWER.
1 flashing 1 steady
0% 25%
1 - Plug the universal charger to a socket and the charging cable to the charger.
2 - Plug the other input (2)
Connect the jumper cable to the NOMAD POWER connector (5).
1- Connect the red clamp to the (+) of the battery.
2- Connect the black clamp to the (-) of the battery.
2 steady
50%
to the NOMAD POWER to start the charge.
3 steady 4 steady
75% 100%
EN