ennoLogic eT650D Manuel De L'utilisateur page 9

ennoLogic Dual Laser IR Thermometer - User Manual
reading will remain on the display. The SCAN icon will
change to HOLD.
Switching Temperature Units
To switch between °F and °C, press and hold the red
MODE button until you hear a beep.
Auto Shut Off and Lock
After approximately 7 seconds of non-use the thermometer
will automatically turn off, unless the lock feature has been
enabled. To enable the lock feature, press and hold the
yellow Laser/Backlight button until you hear a beep. To
disable it, press and hold the red MODE button until
SCAN changes to HOLD. The Lock feature can be used if
hands-free operation for long periods of time is desired.
Dual Laser Pointers and Backlight
To turn the laser pointers and backlight on and off, first
press and release the trigger button to turn the
thermometer on. Then press the yellow Laser/Backlight
button to cycle through combinations of laser and
backlight settings: 1. Laser OFF, backlight OFF, 2. Laser
OFF, backlight ON, 3. Laser ON, backlight OFF, 4. Laser
ON, backlight ON. When the laser is enabled, the icon
appears on the LCD display. The last laser/backlight
setting chosen will be remembered after the thermometer
turns off. Both laser and backlight reduce the battery
lifetime.
5