Publicité
Les langues disponibles
Les langues disponibles
EN
Open the quick-release lock and pull out the handlebar stem until the
automatic latch engages. Then close the quick-release lock again.
The clamp tension of the quick-release lock can also be adjusted by
tightening or loosening the securing nut.
Folding in the scooter
Open the quick-release lever and slide in the handlebar stem by
pressing in the click closure.
Press-in the click closures and pull the handles out of the handlebar
head.
165_166_Anleitung_RZ3.indd 5
Open the quick-release lever and pull the plastic handle upwards
until the axle of the quick release locking system is released from
the mount.
Fold in the handlebar stem. The front wheel must be BETWEEN the
two parts of the folding mechanism.
After you have folded in the handlebar stem, the axle of the quick
release locking system has to lock-in into the mount and the
quick-release lever has to be securely closed.
Art.-No: 165,166
Status 07/13
Page 5/12
05.11.13 15:04
Publicité
