QFX CR-30 Mode D'emploi page 5

EXPLANATION OF DISPLAY LIGHTS
LETTER
A
B
C
D
E
SETTING THE TIME
NOTE: Before setting the TIME make sure all of the non-clock functions (FM,AM) are turned
OFF. If any of the non-clock functions are playing, turn the function OFF by simply pressing &
holding the FUNCTION button (1).
1. Press & hold the CLOCK / MEMORY button (2) until the time flashes on the LED
display. Once the time is flashing you can release the CLOCK / MEMORY button (2). 2.
Press the PREV / HOUR button (6) repeatedly until the correct HOUR is shown on the LED
display.
• NOTE: The "PM" Indicator Light (A) will turn ON when the hour is set to PM.
For AM hours the "PM" Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown on
the LED display.
SETTING THE ALARM
CAUTION: Before setting the Alarm make sure the correct TIME is shown on the LED
Display.
NOTE: Before setting the TIME make sure all of the non-clock functions (FM,AM)
are turned OFF. If any of the non- clock functions are playing, turn the function OFF
by simply pressing & holding the FUNCTION button (1).
1. Press & hold the VOLUME DOWN / ALARM-1 button (3) until the time flashes on
the LED display and the ALARM-1 BUZZER Indicator Light (B) flashes. Once the time is
flashing you can release the VOLUME DOWN / ALARM-1 button (3).
2. Press the PREV / HOUR button (6) repeatedly until the correct HOUR is shown on
the LED display.
• NOTE: The "PM" Indicator Light (A) will turn ON when the hour is set to PM.
For AM hours the "PM" Indicator Light (A) will turn OFF.
DESCRIPTION
"PM" INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT