Getting Started; Battery Installation; Battery Safety Information - iDance STARPADS 9 Manuel D'utilisateur

2. GETTING STARTED

BATTERY INSTALLATION

Requires 3 "AA" alkaline batteries. When performance diminishes, replace with new batteries.
ALWAYS Power off the unit when not in use to preserve battery power.
1. Locate the BATTERY COMPARTMENT on bottom of the unit.
2. Using a Phillips head screwdriver, remove the SCREW and BATTERY DOOR.
3. Install 3 new "AA" batteries, matching polarity icons with those on the BATTERY
COMPARTMENT.
4. Replace the BATTERY DOOR and tighten the SCREW.

BATTERY SAFETY INFORMATION

WARNING!
Battery acid leakage can cause personal injury and cause damage to the product and surrounding
property. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery
acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that
comes in contact with leaked battery acid. Leaking batteries may make "popping" sounds. Dispose
entire toy according to Local, State or Federal Battery Laws.
TO AVOID BATTERY PROBLEMS:
NEVER mix old and new batteries or different brands of batteries.
NEVER mix alkaline, standard(carbon-zinc), rechargeable(nickel-cadmium)batteries with this
product.
NEVER dispose of batteries in fire, as they may leak and explode.
NEVER use rechargeable batteries.
NEVER attempt to charge non-rechargeable batteries.
ALWAYS remove exhausted batteries from toy.
ALWAYS have an adult install batteries consistent with installation instructions.
ONLY use batteries specified by manufacturer.
Batteries are to be inserted with the correct Polarity.
The supply terminals are not to be short-circuited.
P.3