Operation; Set Clock - Nyne N-9 Manuel Utilisateur

4 Operation

Set clock

Set clock automatically
Note:
•
EN
14
NYNE_N-9_User Manual_A6_V1.1_20120406.indb 14
If you have a protective
case on your iPod/iPhone,
you may need to remove it
first.
Connect your iPod/iPhone to
the dock connector on the top
of the device.
The clock time is
+
synchronized automatically
from your iPod/iPhone to
the device.
To set alarm after synchronization:
1
Press repeatedly to
Source
select the time source.
The set clock is displayed
+
on the screen.
2
Press repeatedly until
Set
is displayed at the upper
left corner of the screen.
3
Proceed with step 5 below
to set the alarm.
Set clock and alarm manually
You can also set the clock
and alarm at the same time
manually. Two wake-up timers
(alarm 1 and 2) are available,
which are helpful when you
and your family need to be
woken up at different time.
1
Press Source repeatedly to
select the time source.
2
Press on the top of the
Set
device.
The hour digits start to flash.
+
4/6/2012 11:10:43 PM