EnerG+ HIB-2000 Guide De L'utilisateur page 9

Maintenance
1) Always turn off the heater before cleaning.
2) Do not knock against or rub the heater to avoid damaging the exterior coating, which
may allow rust to appear.
3) Never immerse the heater in water for cleaning.
• To reduce the risk of fire or electric shock, always switch off the unit and wait 10
minutes to allow it to cool before attempting any maintenance or cleaning. It is
recommended that the heater be cleaned periodically, in order to avoid dust blocking
the grill or ventilation.
Cleaning
Wipe the unit with a soft damp cloth. Do not use abrasive
cleaners or spray liquids on the unit surfaces.
Your unit has a filter protecting the heating elements
against dust and dirt.
The filter can be removed and inserted from the right or
the left side.
For optimal operation, we recommend cleaning the filter once every 2 months and
making sure to reinstall it properly on the unit.
Regularly vacuum the front grille to remove the dust. Accumulated dust and lint at the
air outlet can reduce the unit's performance and even damage it. To clean the unit, use
a slightly damp cloth. Note that cigarette smoke can cause unit's color to fade, despite
regular cleaning.
Note:
• It is possible that the unit surface may discolor (yellow) over time due to dust or
cigarette smoke. This is normal and not a manufacturing defect.
MAINTENANCE & CLEANING
8