Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS
• Read all instructions before using this fan heater. SAVE THESE INSTRUCTIONS!
• In Canada, the installation of this product must be carried out by a certified master
electrician.
Before installing and operating this product, the owner and/or installer must read,
understand and follow these instructions and keep them handy for future reference. If
these instructions are not respected, the warranty will be considered null & void and
the manufacturer deems no further responsibility for this product.
1.This product may present a risk of fire if it is not properly installed & maintained as
per the instruction manual.
2.Not following these instructions could lead to serious injury causing bodily harm,
property damage, and electrocutions resulting in death.
3.This product must be installed by a certified master electrician, in accordance with
all local & national building codes.
4.It is the user's responsibility to assure that materials such as blankets, towels, beds,
furniture, laundry baskets, clothing, etc. do not come in contact with, nor come
within 4 inches (10 centimetres) of the heater. Failure to follow this warning could
lead to fire.
5.Never obstruct the airflow locations, i.e, air intake and exhaust. This could cause the
product to overheat and lead to fire.
6.Certain locations are dustier than others. It is therefore the user's responsibility to
determine whether or not the product must be cleaned based on dirt build-up on the
unit's air intake & exhaust, as well as inside the unit. Accumulated dust and dirt
could cause components to become defective, which could lead to fire.
7.If the installer and/or user modifies this product in any way, he/she will be held
responsible for any damages resulting from this modification.
8.Make sure that the heating capacity of the unit is sufficient for the size of room it is
intended to heat. If the capacity is insufficient, the heater will work constantly,
causing it to discolour (turn yellow) and/or prematurely deteriorate.
Suggested calculation to determine heating requirements :
10 watts / square foot (0.3 m
1.2 watts / cubic foot (0.3 m
(2.44 meters).
9.An activated thermal protection (overheat sensor) warns that the heater has been
subjected to abnormal conditions. If this occurs, stop using the heater immediately
and bring it to an authorized service centre for inspection and repair.
) based on a ceiling height of 8 feet (2.44 meters).
2
) for locations where the ceiling height exceeds 8 feet
3
2
Publicité
