Publicité
Les langues disponibles
Les langues disponibles
POLISHING OPERATION
Warning:
Make sure that the polishing cover is properly fitted and fastened
before starting the power tool and make sure that the car and the working
area is clean and dry.
• Hold the power tool firmly. Turn the power tool on and then apply the
wool bonnet to the workpiece.
Caution: Use the slower speeds for polishing. Improper use may damage
the vehicle's finish.
• The wool bonnet should be LIGHTLY in contact the polishing surface.
MAINTENANCE
1. MAINTENANCE OF THE MOTOR
The motor unit winding is the "heart" of the power tool. Handle it with care
to ensure the winding does not become damaged and/or wet with oil or
water.
• To extend the working life of your power tool you must have the power
tool serviced regularly by an authorized servicing agent.
2. MAINTENANCE OF THE SUPPLY CORD
If the power cord is damaged, it must be replaced by the manufacturer or
his agent in order to avoid a safety hazard.
Warning: Always use the auxiliary handle supplied with the
machine to avoid losing control of the machine, which may result
in injuries.
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE, the waste electrical and electronic equipment directive)
Your product has been manufactured using high quality
materials and components which can be recycled and
used again. At the end of its life, this product cannot be
disposed of in normal domestic waste, but must be taken to a special
collection point for recycling electrical and electronic equipment. This is
indicated in the user manual and in the packaging by the waste container
marked with a cross symbol. Used raw materials are suitable for recycling.
By recycling used appliances or raw materials, you are playing an
important role in protecting our environment. You can ask your local
council about the location of your nearest collection point.
DECLARATION OF CONFORMITY
For the product stated below.
Product name: DUAL ACTION POLISHER
Model number: DA850
Lot number: xxxxx
Year of manufacture: 2019
We declare that it complies with the following directives:
• EC Machinery Directive: 2006/42/EC
• EC Directive EMC: 2014/30/EU
• EC Directive RoHS: 2011/65/EU
And of the following harmonised European standards, respectively:
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011+A2:2013
EN 55014-1:2006/A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN61000-3-3:2013
EN62321:2009
Date of issue: Almere 01/08/2019
Mascot Online
Authorized Signature name: B. van Dijk
Publicité
