THOMSON THJU91IX Mode D'emploi page 20

USING YOUR APPLIANCE
1- Place the juicer container on the motor unit as Fig.1, Turn the cup in
clockwise until it clicks into place.
2- Then assemble the pulp selector (sifter + pulp selector) through the
rotating axis on the juice container of the juicer (Fig 2).
3- The adjust sifter has a knob that can move smoothly and can control the
sifter hole, see Fig 3. Turning the knob toward left would reduce the sifter
hole and in opposite, enlarge the hole.
Fig 1
Fig 2
EN-8
Fig 3