Ribiland PRMPP063 Manuel D'instructions page 29

63 cc
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
7. Before storing the machine, repair or replace any worn or damaged parts.
8. Remove the air cleaner element from the carburetor and clean it thoroughly with soap and water.
Rinse and dry thoroughly, then add a few drops of oil and work it in. Reassemble.
9. Store the machine in a clean, dust-free area.
Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.4- Disposal
When disposing of your machine, remove oil and fuel from the machine, and be sure to follow the
local regulations. Do not dispose of in/with household rubbish
6.5- Troubleshooting
Phenomena
Cause
The wheel of the starter
The starter lead
lead is struck or
cannot be
blocked by other
pulled out.
things.
The engine is burnt or
The crankshaft
blocked by other
is not running.
things.
The fuel is inferior.
(Impurity, regenerated)
The fuel is sucked too
much.
The muffler exhaust
The damage, short
The engine
circuit, and breakage if
cannot be
the spark plug electrode
started.
The blockage of the
carburetor
The damage of the
piston and the cylinder
The breakage and short
circuit of the coil
Lack of water in the
pump
Looseness of the joint
of the suction hose
Inferior buckles at the
joint of the suction
No suction
hose
Cracking and damage
of the suction
Bent drainpipe, the
valve is locked.
Handling method
Disassemble and repair (Competent servicing dealer)
Disassemble the engine and replace the damaged parts
(Competent servicing dealer)
Replace it.
Turn on the throttle fully and pull the starter
continuously.
Clean it.
Clean the electrode or replace the spark plug. Check
and replace the circuit.
Disassemble and repair the carburetor. (Competent
servicing dealer)
Disassemble and repair the engine. (Competent
servicing dealer)
Replace. (Competent servicing dealer)
Supply water.
Don't let air in when installing.
Replace a quality-proven one. (Competent servicing
dealer)
Replace a quality-proven one. (Competent servicing
dealer)
Straighten the bent part and turn on the valve.
- 26 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

518591

Table des Matières