Troubleshooting - Archos TV CONNECT Mode D'emploi

Troubleshooting

If you do not see the pointer:
The ARCHOS TV TOUCH remote goes in stand by mode. Press any button on the remote to
wake it up. A message displayed on screen tells you the remote is active.
If your ARCHOS TV TOUCH remote does not respond:
Press the ON/OFF button on the ARCHOS TV CONNECT. Select the option "Start remote pairing
process" and confirm. Follow the onscreen instructions. Note that a short press on the ON/OFF
button allows you to switch between options and a long press to validate.
If your WiFi reception is too low:
Make sure you are not far from the WiFi hotspot.
Update the firmware of the device: http://www.archos.com/support.
Reset and redefine your connection parameters.
Contact your WiFi connection provider.
If you can't access media on external servers:
Make sure the devices are connected to the same Internet network.
Make sure the servers are turned on and sharing options set.
Consult the help of your device to know the sharing process.
28