MAXSA 44216 Instructions De Montage page 5

TROUBLESHOOTING
PROBLEM
Light will not switch on
when there is movement
in the detection area.
Light switches on during
the day.
Light switches on for no
apparent reason.
Light quickly flashes on
and off or is not bright as
normal.
Please save these instructions for future reference.
POSSIBLE SOLUTIONS
• Ensure that the power switch on the body has been
turned to the AUTO position
• Ensure that the motion sensor has been positioned to
face oncoming movement
• Ensure that the battery has been fully charged in direct
sunlight for 3 sunny days.
• Check to see that the LUX control has not been set too
far towards ( ).
• Check to see that the solar panel is not near night time
light sources.
• The rechargeable batteries may need to be replaced
• The LUX control may be set too far towards the (
position.
• The SENS control may be set too far towards the (+)
position.
• Check for moving trees, traffic or pets.
• Check for reflective objects in the detection area such
as windows, water, or white walls.
• Test the motion sensor by covering it completely with
cardboard and waiting several minutes to make sure
it does not detect motion. If the light still switches on,
please contact MAXSA for further assistance.
• Battery charge may be low. Turn the power switch to
the OFF position and charge the battery for three (3)
sunny days, ensuring the solar panel has been placed
in direct sunlight.
• The rechargeable batteries may need to be replaced.
www.maxsainnovations.com
Part # 44216, 44218

)
5