Publicité
Les langues disponibles
Les langues disponibles
CHOOSING A LOCATION FOR YOUR SOLAR SECURITY LIGHT
For optimum sun exposure and longer light output, place the solar panel, when attached to the
Security Light, in a position that receives at least 6-8 hours of direct sunlight per day.
HOW TO INSTALL YOUR SOLAR SECURITY LIGHT
Both the Security Light and the solar panel can be mounted vertically or horizontally onto a solid
surface, using the supplied wood/sheet metal screws and anchors.
BEFORE FIRST TIME USE OF YOUR SOLAR SECURITY LIGHT:
1. Ensure the power switch on the main body of your Security Light is in the OFF position
2. Leave the switch in this position for up to 3 days and make sure the solar panel is placed
in direct sunlight.
OPERATING YOUR SOLAR SECURITY LIGHT:
After the initial 3 day charge of your Solar Security Light, move the switch on the main body to
the AUTO position. Your Solar Security Light is now ready for use.
Underneath the motion sensor, there are 3 adjustment dials: TIME/SENS/LUX. All 3 of these
adjustment dials may be adjusted using the steps below
TIME PERIOD ADJUSTMENT (TIME)
The time period control sets the duration that the Solar Security Light will be illuminated when
activated. The time period is adjustable over a range of 10 seconds to 4 minutes. The shortest
time period is with the TIME control set fully clockwise (-).
To adjust the time period, set the TIME control at a random position, trigger the sensor unit and
measure the time period the light illuminates. Increase or decrease the time period by adjusting
the TIME dial and re-trigger the sensor unit. Continue with this process until the desired time
period is obtained.
To optimize battery use, we recommend you keep the factory setting of between 30 seconds and
1 minute of light when triggered. Longer activations will use up battery capacity more quickly.
MOTION SENSOR ADJUSTMENT (SENS)
The sensitivity of the motion sensor on this Solar Security Light will be affected by temperature.
The cooler the temperature the more sensitive the motion sensor will become. The sensor is
most sensitive when the SENS dial is turned fully counter-clockwise (+).
www.maxsainnovations.com
Part # 44216, 44218
3
Publicité
