General Safety - EcoFlow CDSP-20 Manuel D'utilisation

STOP Before you start
A condensate pump is an electrical device designed
to operate in inherently wet environments.
ALWAYS USE EXTREME CAUTION
when installing or maintaining this product!
Need Help: Call 1-877-326-3561 for assistance;
Do Not Return to Store
Important Safety Instructions
Carefully read and follow all safety
instructions in this manual and on pump.
SAVE THESE INSTRUCTIONS – This manual
contains important instructions that should be
followed during installation, operation, and
maintenance of the product.
Save this manual for future reference.
Safety Labels
This is the safety alert symbol. When you
see this symbol on your pump or in this manual,
look for one of the following signal words and be
alert to the potential for personal injury!
not avoided, will result in death or serious injury.
if not avoided, could result in death or serious
injury.
not avoided, could result in minor or moderate
injury.
NOTICE
indicates practices not related to
personal injury.
Keep safety labels in good condition. Replace
missing or damaged safety labels.
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561

GENERAL SAFETY

Indicates a hazard which, if
Indicates a hazard which,
Indicates a hazard which, if
General Safety
touch an operating motor. Motors are de-
signed to operate at high temperatures. To
avoid burns when servicing pump, allow it to
cool for 20 minutes after shut-down before
handling.
Do not allow pump or any system compo-
nent to freeze. To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system com-
ponents.
Wear safety glasses at all times when work-
ing on pumps.
body may explode if used as a booster
pump.
2
Risk of burns. Do not
Risk of explosion. Pump