Leckey Everyday Activity Seat Mode D'emploi page 8

7.1 Attaching the sandals/
Attaching the footplate straps
(Wooden footplate accessory)
To attach the sandals simply unscrew the
knob and washers from the sandal. Place the
sandal onto the footplate positioning the screw
through the slot and replacing the washers and
knob. Repeat this for the other side.
Attaching Footplate Straps
(Wooden footplate accessory)
Locate the footplate straps to suit the
person's feet, and mark out the strap hole
locations. Drill 7mm holes in the wooden
footplate in the marked out strap hole
positions. Fit the footplate straps to the
wooden footplate by securing the socket
cap, the washer and the nut. Tighten
to secure.
Adjusting Footplate Straps
To remove padded footplate straps, pull
Velcro strip away from the strap. To secure
the padded foot strap around the user, pull
the Velcro strip tightly and secure to the strap.