LEXIBOOK MIC200 Serie Mode D'emploi page 11

WARNING:
• Risk of explosion if battery is incorrectly replaced. Please only replace it with an identical or an equivalent
battery. (For Service instructions only; battery is not intended to be replaced by the USER).
• The battery should not be exposed to high temperatures, such as sunlight, fire or anything similar.
Safety Instructions
• Keep a minimum distance around the device for sufficient ventilation.
• The openings should never be blocked by newspapers, curtains, tablecloths, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Device for use in a temperate and/or tropical climate.
• Batteries should be disposed properly. Take them to the collection container in order to protect the
environment.
TURNING THE DEVICE ON AND OFF
1. To turn on the Wireless microphone, press and hold the power control (4). Once powered on you will hear
a signal tone.
2. To turn off the device press and hold the same button until you hear a signal tone.
WARNING: Significant electromagnetic interference or electrostatic discharges may cause the device to
malfunction or lose data. If the device is not functioning correctly, switch it off and then on again, or unplug
the USB cable.
BLUETOOTH® PAIRING
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Lexibook® is under license. Other trademarks and trade names are those of their respective
owners.
© 2017 Bluetooth SIG, Inc.
1. Activate the Bluetooth® function on your personal device (smartphone, MP3 player, etc.). Please refer to
your device's instruction manual on how to activate this function.
2. Turn the wireless microphone on to activate auto-detection of a nearby device. The blue indicator will start
blinking.
3. Confirm pairing or select the Bluetooth® name "MIC200" to connect your player to the speaker.
4. If pairing is successful, a "Beep" sound will come out from the speaker and the blue indicator will glow
steadily. You can enjoy music via the Bluetooth® device now.
5. To stop the connection with the speaker, press the button on your Bluetooth device.
Notes:
• When turned on, the speaker automatically searches for a device that it has previously synchronized with.
• If your Bluetooth® device requires a password, the default password is 0000.
11
MIC200seriesIM1247_V16_217YL.indd 11 16/6/17 4:07 pm