LEXIBOOK MIC200 Serie Mode D'emploi page 10

UNPACKING YOUR DEVICE
When unpacking, ensure that the following elements are included:
1 x Wireless microphone with speaker and lights / 1 x micro USB cable / 1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this toy and
should be discarded for your child's safety.
QUICK PRESENTATION
Please refer to the diagram p.2.
1. Microphone
2. Echo button
3. Mic volume control
4. Power and lights control button
5. Speaker
6. LED light
7. Micro USB charging port
8. TF card/ micro memory card slot
9. Music control knob (play/pause, previous/next, volume up/down)
CHARGING THE DEVICE
The Wireless microphone with speaker and lights operates with the micro USB charging cable (included) or
with a USB type adaptor (not included) 5V , 500mA.
Power supply
1. Check that the unit is switched off.
2. Insert the small end of the micro USB cable (included) into the micro USB charging port (7).
3. Connect the other end of the micro USB cable into the USB port of your powered computer or USB type
power adaptor (not included) and plug it into a wall socket. The indicator near the micro USB charging port
lights up in red when the device is charging.
4. Once loading complete the LED light will turn off.
Notes: Please note that the micro USB cable can be used for battery charging only and not for data transfer.
The micro USB cable can be used for charging during playback.
10
MIC200seriesIM1247_V16_217YL.indd 10 16/6/17 4:07 pm