LBA Home Appliance SHORT 128290301 Manuel D'utilisation page 12

LBA H A
EN SHORT
ome ppliAnce
switch according to the installation regulations, which ensures all-
pole cut, directly connected to the power terminals and it must have a
contact separation in all its poles, which provides total disconnection
under category III surge conditions.
· Do not connect the ceiling fan to a dimmer or regulator.
· The mounting plate must be firmly screwed to a load bearing structure
eg. a concrete must be securely nailed or screwed between the beams.
· Attach fan blades after the fan motor housing is installed and properly
secured. Keep the fan motor and fan blades in original package until is
ready to be installed.
· Check and confirm, after the fan is completely installed, that all
connections are proper and secure to prevent the fan from falling or
causing property damages or personal injury.
· Take care not to bend or damage the motor drive shaft or fan blades
when handling or installing them. If such defect is noticed, please contact
the customer service before installation of the ceiling fan.
· Use of unapproved remote control voids the warranty. Only use our
remote control.
· Do not remove the fan from the ceiling after installation.
· N'utilisez jamais d'accessoires qui ne sont pas recommandés ou fournis
par le fabricant.
· N'utilisez pas l'appareil si le câble est endommagé, après une mauvaise
utilisation ou si l'appareil est endommagé.
· Tous les travaux d'entretien et de réparation doivent être effectués
uniquement par une personne qualifiée. N'essayez pas de réparer
l'appareil vous-même.