Akrapovic Slip-On Line 285.05.999.000 Mode D'emploi page 6

www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the motorcycle on a stand, we recommend a central racing stand. Make sure, that surface is solid and lat.
2.
Unscrew the marked mufler's bracket bolt, marked clamp, and carefully remove the mufler off the motorcycle (F 01).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
INSTALLATION OF THE AKRAPOVIČ EXHAUST SYSTEM:
1. Position the mufler correctly and hand tighten it onto the motorcycle and outlet side of the stock pre-mufler using bolt,
nut and washer from the Akrapovič installation kit and stock clamp. Align the mufler in respect to the motorcycle
and tighten the mufler's bracket bolt and clamp to the speciied torques (F 02, 03, 04).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
F 01
F 02
6 / 10