Klarstein VULSINI Mode D'emploi page 45

Function
Setting
Weekly timer
Description
When the unit is on or in standby, press and hold
the setting icon on the remote control for 3 seconds
or press the timer button on the control panel for 3
seconds in standby. The [00:00] indicator will flash.
Set the current time first. Press the [+] button on the
remote control to set the hour and the [-] button to
set the minute.
After setting the current time, press the setting icon
again to activate the weekly timer, and then press
the calendar icon to select Sunday to Saturday. The
selected date will light up. Then press the settings
icon to set the power off time and power on time in
succession, and then press the OK button directly to
complete the weekly timer settings.
Note: The current time must be set after the first
power on or power off, otherwise the clock will
remain in the "00:00" state and the timer function
cannot be used.
The clock automatically lights up when the power is
turned on. The clock will automatically turn off the
display after 60 seconds in the standby state. Press
any function key to display the clock again then.
If you are not in the settings, press the calendar icon
directly to select the Weekly Timer setting.
EN
45