Maintenance And Care; Transport; Storage - Kärcher GP 60 MOBILE CONTROL Mode D'emploi

Finish operation
 Rinse the pump after every use if you
use to transport water with additives.
 Turn off the appliance.
 Disconnect the main plug from the
socket.

Maintenance and Care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Illustration
 Check pre-filter regularly for dirt. If it is
visibly dirty, proceed as follows:
 Unscrew the lid of the filling nozzle.
 Remove the pre-filter and clean it under
flowing water.
 Rinse out dirt residues on the floor of
the filter intake by opening the drain.
 Insert cleaned pre-filter
 Manually screw the lid on to the filling
nozzle and the drain opening and tight-
en it.
Maintenance
The appliance is maintenance-free.
Battery
Only use branded batteries of type CR2032
Care
Back to starting stage
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
When transporting by hand
 Lift appliance by the carrying handle
and carry it.
When transporting in vehicles
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
Storing the Appliance
 Empty water in the pump using the
drain opening (item 5).
 Store the appliance in a frost free area.
– 7
EN

Transport

Storage

23