Duux bora Smart Manuel D'utilisation page 8

Fan speed
Press the key to switch between low (I) or
high (II) fan speed. The corresponding indicator
on the display will illuminate.
Hygrostat
Note: the hygrostat can only be used in AUTO
mode.
Press the key to activate the self-regulating
hygrostat. The extraction intensity will now
self-regulate according to the ambient
humidity. Press multiple times to change the
desired humidity in the following order: 80% > 75%
> 70% > 65% > 60% > 55% > 50% > 45% > 40% >
35% > 30% > ... and so on.
Each press will decrease with 5%. Once released,
the selected humidity on the display will blink 3
seconds to confirm your choice.
Note: When the hygrostat is set below the
actual humidity, the compressor will start to extract
moisture at the set speed until the desired humidity
has been reached. When the hygrostat is set above
the actual humidity, the compressor will stop but
the fan will remain to run at the set speed.
The default set humidity value is 50%
14
WiFi mode
Important: WiFi mode can only be activated in
stand-by mode. Please connect to WiFi before
turning on the device with the power button. Press
and hold the key for 3 seconds to activate WiFi
mode. The indicator will start flashing rapidly to
search for devices to pair. Please refer to "WiFi and
app operation" paragraph further in this chapter
for pairing instructions.
Operation mode
Press the key to switch between AUTO and
CONTINUOUS mode. The corresponding indicator
will illuminate.
AUTO mode can used in combination with the
hygrostat to self-regulate the ambient humidity.
CONTINUOUS mode will activate the compressor
and fan at high speed, regardless of the ambient
humidity. The fan speed can be regulated with the
key.
Child lock
Press and hold the key for 3 seconds to
activate child lock. The display will show "LC" once it
is activated. In child lock, all buttons on the display
are disabled until the lock is removed.
To remove child lock, press and hold the
for 3 seconds again.
Timer mode
Press the key to activate the timer setting. With
every press the timer will increase with one hour in
the following sequence: 1h > 2h > 3h > 4h > ... 23h
> 24h > OFF. Once the timer is activated, the device
will automatically shut down after the set timer has
been completed. With every press the display will
show the selected timer. To deactivate the timer,
shortly press twice after setting the timer. As long
as the timer is active, the indicator will illuminate
on the display.
LED display
In auto, continuous and drying mode, the display
indicates the ambient room humidity. When using
the timer function, it also indicates the set timer
hours
Full water tank
When the water tank is full, the icon on the
display will start flashing and the LED display will
show "FL"
The compressor and fan will stop running
automatically. A beep will sound for 10 times to
remind the user to drain water from the water
tank. When the emptied water tank is placed
back in the product, it will automatically resume
operation.
WIFI and APP operation
Scan below QR code to download the Duux APP
or search DUUX APP in the App Store or Google
Play Store to start the procedure to download the
APP. Once installed, enter your e-mail address and
complete the registration
APP STORE PLAY STORE
Connect to WIFI
Once registered, click "add duux device" on the
1
main screen or use the "+" button in the top
right corner to add a new device.,
Search for "Bora" and press to continue
2
Connect to your preferred WiFi network and
3
enter the corresponding password
Follow the instructions in the app to complete
4
the pairing process.
15