Cleaning And Care - Numan Drive Mode D'emploi

SPEAKER OUTPUT
If possible, using high-quality twin-core speaker single wire with a diameter of at least 1 mm² to connect the
speaker output terminal.
Note: Make sure the polarity is correct! Otherwise, the sound quality will suffer.
• Connect the similar colored terminal.
• The strands of the speaker cables are marked with different colors or shapes Split the single wire down to
approx. 30 mm and remove approx. 10 mm of the insulation on each strand. Twist the single wire so that no
strands are protruding. Tin coating is not necessary. Turn the respective connector terminal out and insert the
end of the cable in the corresponding opening. And then, turn the connector terminal in opposite direction to
clamp the cable in place.
Unplug the mains lead before cleaning the product. Clean the product using a soft, moist cloth. Use a mild
detergent and never use solvents or strong, abrasive cleaning agents for cleaning the product.

CLEANING AND CARE

34