Transport; Packing; Unpacking - ilco Silca Bravo III Manuel D'instructions

BRAVO III with EZ-Jaw
1

TRANSPORT

The BRAVO III with EZ-Jaw key-cutting machine is easily transported and is not dangerous to handle.
The machine must be placed in its packaging and carried manually by two persons.
1.1

Packing

The BRAVO III with EZ-Jaw is packed in a strong cardboard box, the dimensions of which are shown
in fig. 3, sufficiently robust to be used for storing the machine for long periods.
Keep dry
Fig. 3
Inside the box the machine is enclosed in two expanded polymer shells. The shells and cardboard box
ensure safe transportation and protect the machine and all its parts.
1.2 Transport
To ensure that the BRAVO III with EZ-Jaw key-cutting machine remains integral, it must always be
moved in its packaging, with the carriage released.
1.3

Unpacking

To remove the machine from the packing box:
1) cut the straps with scissors and remove.
2) prise off the staples;.
3) open the box without damaging it as it may be used again (e.g. removals, dispatch to the
manufacturers for repairs or servicing).
4) check the contents of the box, which should comprise:
5) remove the key-cutting machine from the protective shell.
4
490 mm
Handle with care
1BRAVO III with EZ-Jaw key-cutting machine packed in a protective shell
1set of documents, including: operating manual, spare parts list and guarantee
1 connecting wire
1 accessory container
Copyright Silca 2010
Operating manual - English
590 mm
This side up