Napa 791-6430 Manuel De Fonctionnement

THiS operaTing ManuaL ConTainS iMporTanT
SafeTy inforMaTion. read CarefuLLy and
underSTand aLL inforMaTion before operaT-
ing TooL. Save THiS ManuaL for fuTure uSe.
This is the safety alert symbol. It is used to
!
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to
avoid possible injury or death.
owner/uSer reSponSibiLiTy
The owner and/or user must have an understanding of
the manufacturer's operating instructions and warnings
before using this service
in the use and
be careful, competent, trained, and qualified in the
safe operation of the equipment and its proper use
when servicing motor vehicles and their components.
warning information
understood.
if the operator is not fluent in english, the manufacturer's
instructions and warnings shall be read to and discussed
with the operator in the operator's native language by the
purchaser/owner, making
comprehends its contents.
owner and/or user must study and maintain for future
reference the manufacturer's instructions. owner and/or
user is responsible for keeping all warning labels and
instruction manuals legible and intact. replacement labels
and literature are available from the manufacturer.
for your SafeTy and To prevenT inJury:
use Service Jack for
lifting purposes
always support
vehicle with
791-6430
jack. personnel
operation of equipment
should be emphasized
sure that the
onLy.
jack stands.
Model# 791-6430 — 3.5 Ton Capacity
Swivel Handle Service Jack Speedy Lift™
involved
shall
and
operator
Study, understand, and follow all instructions
•
provided with and on this device before use.
do not exceed rated capacity.
•
use only on hard, level surface.
•
This is a lifting device only!
•
immediately after lifting, support the vehicle with
•
a pair of appropriately rated jack stands.
never work on, under, or around a load supported
•
only by this device.
do not move or dolly the vehicle while on the
•
jack.
no alterations shall be made to this device.
•
use for side lifts only! Lift only on areas of the
•
vehicle as specified by the vehicle manufacturer.
The release valve on this model is spring-biased
•
in the "on" position and may require special
skills and training to operate with proficiency. use
extraordinary care when lowering a load.
do noT position jack under a load beyond the
•
lift arm marking.
failure to heed these markings may result in
•
personal injury and/or property damage.
1 11/07/07