TaoTronics TT-SK025 Mode D'emploi page 5

Button Control
Function Operation
Power On / Off Press and hold the Power Button until a beep
is heard.
Volume + Press the Volume + button
Next Track Press and hold the Volume + button under the
Bluetooth mode
Volume - Press the Volume - button
Previous Track Press and hold the Volume - button under the
Bluetooth mode
Switch to Bluetooth Press the Mode Button to switch between the
/ AUX Mode Bluetooth and AUX mode.
Play / Pause Press the Play / Pause button
Mute Press the Play / Pause button to mute /
(only under AUX mode) unmute
LED Indication
Operations LED Status
Power on
Light up blue / green.
Pairing Flashes blue fast
Bluetooth
Stays solid blue during playing;
Connection
Connected
Blinks blue slowly when no audio input
Stays solid green during playing;
AUX Connection
Blinks green slowly when no audio input
02
How to Use
Bluetooth Connection
1. Plug the sound bar to power, press and hold the Power Button until a beep is
heard. The device is in the Bluetooth mode initially.
2. When the indicator starts to flash fast, activate the Bluetooth function on your
device and search for devices nearby.
3. Find "TaoTronics TT-SK025" in the search results and tap to connect.
4. A beep will be heard and the indicator will turn solid blue upon a successful
connection.
Notes:
1) When it's power on, the sound bar will automatically connect to the
device last paired if any. Otherwise, it'll enter the pairing mode with
the LED indicator blinking fast.
2) To change the connection, press and hold the Play / Pause button to
enter the pairing mode and connect another device.
AUX Cable Connection
AUX Input
1. Press the Mode Button to switch to AUX mode.
2. Plug in the AUX cable into the AUX Input port at the back.
3. Connect to an AUX device via the cable.
Note: Buttons on the sound bar do not work under the AUX mode,
except that pressing the Play / Pause button can mute / unmute.
AUX Output
03