Well Health WH-OX01 Manuel D'utilisation page 4

English
Section 2 Introduction
2.1 Brief Device Description
The Pulse Oximeter, based on all digital technology, is
intended for noninvasive spot-check measurement of
functional oxygen saturation Advanced DSP algorithm
can minish the influence of motion artifact and
improve measurement accuracy of low perfusion.
The Oximeter can be used to measure human
Hemoglobin Saturation and heart rate through finger.
The product is suitable for family, hospital (including
clinical use in internist/surgery, pediatrics, ect),
Oxygen Bar, social medical organizations, physical
care in sports and etc.
2.2 Intended use
This product is suitable for the hospital (including
surgey, paediatrics, and clinical use), oxygen bar,
sports health (using them before or aftersports, do
not advising using them during the movement), and
community health care, etc.
2.3 Product Features
• Lightweight for carrying and Easy-To-Use.
• Manually adjust the direction of interface.
• LED display, simultaneous display for testing value
and bargraph.
• Low Battery voltage indicator.
• Automatically standby or sleep.
2.4 Specifications
1. Display Type: OLED display
2. Spo2:
Measurement range: 70%-99%
Accuracy: ±2% on the stage of 70%- 99%,
Unspecified (≤ 70%)
Resolution: ±1%
3. PR:
Measurement range: 30BPM-240BPM
Accuracy: ±1 BPM or ±1 %
4. Power Supply: 2 AAA 1.5V batteries
5. Dimension: 60*35*35mm
6. Environmental:
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
Air Pressure
EN - 3
5°C-40°C
-10°C-40°C
15%-80%
10%-80%
70-106kpa