Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
12
4
Turn the lock anticlockwise (A) and remove
the retaining frame (B).
5
Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
- Remove the cutter from the shaving guard and
clean it with the brush,
- Clean the inside and outside of the shaving guard
with the brush.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is
restored.
6
Put the shaving heads back into the shaving unit.
Note: Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in the
shaving-head holder.
7
Put the retaining frame back into the shaving
unit (A) and turn the lock clockwise (B).
Publicité
