Cleaning And Storage; Specifications - Ener-G+ HEA-115J88 Gold Manuel D'utilisation

29. Do not run the power cord under carpeting; do not cover the cord with throw rugs, runners or the like. Arrange the
cord away from traffic area where it may be tripped over.
30. To disconnect the heater, turn the power switch to off, then unplug the unit.
31. To prevent possible fire, do not block air intakes or exhaust openings in any manner. Do not use on soft surfaces, like
a bed, where openings may become blocked.
32. This unit is intended for household use only. DO NOT use the unit in such areas as construction sites, greenhouses,
barns or stables or any place that has flammable materials.
33. There is a thermostat sound alarm to protect the consumer if the heater overheats. In this case, unplug the heater
and remove any objects that could cover it. Then wait 15 minutes before you reactivate it.
34. 'SAVE THESE INSTRUCTIONS'

5. CLEANING AND STORAGE

1. Turn the unit OFF and unplug the unit before cleaning.
2. Use only a soft cloth to clean the exterior. An air compressor or a vacuum cleaner can be used to clean the
interior.
3. Do not use gasoline, paint thinner or other chemicals to clean the heater
4. Store the heater in its original box and store in a cool, dry place.
NOTE: If you experience a problem, please call our EnerG+® customer service department at 1-866 967-7333 ext 227. Do
not attempt to open the heater housing by yourself. Doing so may void your warranty and cause damage to the heater
or personal injury,

6. SPECIFICATIONS

Power supply:
Wattage:
120V / 60Hz
1500Watts
P a g e | 4