Acqua Brevetti MINIDUE Manuel D'usage Et Entretien page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4)
Check periodically that AcquaSIL 2/15
bag has to decrease proportionally with water treated). If this is not the case, please contact Acqua
Brevetti 95 s.r.l. (telephone: +39.(0)49.8973432 e-mail info@acquabrevetti95.it).
B1.6 Allowed installation schemes
Install MiniDUE according to one of the following schemes.
The MiniDUE pumps with ½" connections (code PM004 and PM005) are equipped with bidirectional
connection, the entrance and exit of the water can occur indifferently from both the connections.
The MiniDUE pump with ¾" connection (code PM011) is not equipped with bidirectional connections thus it
has to be installed considering as entrance the side from where three holes are visible (as in figure).
Any other configuration may lead to the non proper working of the device. Do not over close the connections.
In case of doubt please contact Acqua Brevetti 95 s.r.l. (Tel.: +39.(0)49.8973432 or send an e-mail
info@acquabrevetti95.it).
Respect the entrance,
install the pump
considering as
entrance the side from
where three holes are
visible
MAN 115
MINIDUE - ENGLISH
®
is regularly consumed (the amount of product inside the refill
PM004
PM004 con kit AV017
PM005
PM011
PAG.E-9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pm004Av017Pm005Pm011

Table des Matières