Freestanding Installation - Scott Living 1214WF-40-233 Instructions D'utilisation, D'assemblage Et De Maintenance

FREESTANDING INSTALLATION

Estimated Assembly Time:
Tools Required for Assembly
1. Distribute the White Rocks (G) and Acrylic Glass (H) evenly in the tray of the Fireplace (C).
1
G
H
2. Lift and carefully align the Wooden Surround (A) with the Fireplace (C). Align the four slots in the
metal brackets that are pre-mounted to the Wooden Surround (A) with the four pins extending from
the sides of the Fireplace (C). Guide the Wooden Surround (A) back towards the Fireplace (C) and
allow it to slide slightly downward while guideing the pins into the slots. Access the securing bracket
mounted to the Wooden Surround through the top opening, use two Wood Set Screws (EE) to secure
the bracket to the Fireplace(C) , repeat for the opposite side.
2
A
OPTION 2
20 minutes
(not included): Phillips screwdriver.
C
(For wall mount installation refer to page 6)
10
C
EE
Pin
Slot