Outwell 203-95 APPETIZER DUO Mode D'emploi page 5

INSTRUCTION MANUAL
• If the fuel line is not equipped with a screw thread at the end, screw the fuel nipple securely to
the back of the stove using pliers
• Mount the regulator onto the gas cylinder and connect the gas cylinder to the appliance using
the fuel line
• Make sure that a complete gas seal has been made. If you want to check for gas soundness do
this outdoors. Do not check with a naked flame, use warm soapy water applied to the joints
and connections of the appliance. Any leakage will show up as bubbles around the leakage
area. If the appliance leaks unscrew the cartridge and contact your local deale
Setting up your cooker model 210, 214
Open the lid by releasing catches. Open and attach the two windshields to the lid. Attach the gas
hose to the brass inlet nozzle and secure with a suitable hose clip (see your LPG dealer for advice).
INSTALLING WITH GAS SUPPLY
To operate you will need a precision-filled standard G30/G31 grill LP gas cylinder with external
valve threads.
Use a suitable hose which must comply with EN16436-1 or local regulation, and the length should
not exceed 1.5 metres. The tube shall be readily visible across its entire length for inspection after
installation.
Danger: You must have a suitable regulator which must comply
with EN16129 and gas cylinder (as shown below) in order
for the barbecue to operate safely and efficiently. Use of an
incorrect or faulty regulator is dangerous and will invalidate any
warranty.
Connect LP Gas cylinder
Before connecting, be sure that there is no debris caught in the
head of the LP tank, head of the regulator valve or in the head
of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it stops, make sure that the tube is not
subject to twisting.
Danger: When changing the gas container, care must be taken to keep away from any source of
ignition.
Disconnect LP Gas cylinder
Before disconnecting make sure the LP gas tank valve in "CLOSED"
Max Dia. 320mm
Max Height 700 mm
5